JDSM Monitoring Equipment

Monitoring & Control Equipment

Javelin Digital System Monitor (JDSM)

Automatic engine pump unit monitoring and remote control system with SMS Text Message notification direct to your mobile phone. Reports up to eight user definable shut-down messages including:
	· Lo Flow · Hi Press · Lo Press · Hi Temp · Oil Pres		Low Pump Flow High Pump Pressure Low Pump Pressure High Engine Temperature Low Engine Oil Pressure
Additional information provided includes:
	· User defined unit identification (up to 16 characters) · Operational status (stopped, starting or running) · Time and date the message is sent
Operational status can be checked at any time by simply calling the JDSM and waiting for the return SMS text message. The engine pump unit can easily be shut-down remotely from the operator's mobile phone. Alternatively a second relay can be connected to a by-pass valve allowing water to return to its source so that the pump unit can continue running, whilst pipes and irrigation equipment in the field are repositioned, without the operator having to physically travel to restart the pump unit. Fully compatible with Javelin's existing JSM ancillary equipment (no-flow switches, pressure switchgauges, engine temperature and oil pressure switchgauges etc.) making upgrading extremely cost effective and can easily be adapted to most other systems. Ancillary Equipment (as required for new installations - part numbers shown in red)
	· Temperature Interface Unit · Temperature Probe 2-Pin · Fuel Shut-Off Solenoid · No Flow Switch · Hi/Lo Pressure Switchgauge · Pulsation Damper			EP501100 EP501200 EP301300 EP301200 EPM300020 EPM600080
Remote controlled starting requires additional equipment (See 'Automatic Priming' below)
*Features* On shut-down, automatically sends an SMS text message to your mobile phone to report:
		· Cause of shut-down (low oil pressure, flow or pressure, high temperature or pressure). · Time and date the message was sent. · Unit identification (user definable up to 16 characters).
Also reports current operational status to your mobile phone, on request, by SMS text message (stopped, starting or running). The engine/pump unit can be stopped from your mobile phone and an SMS text message can be requested to confirm by return. A second relay is included, which can be used to activate a by-pass solenoid from your mobile phone, to prevent engine/pump unit shut-down if required. Suitable for Diesel engine Pump units and Tractor PTO pumps JDSM (EPJDSM00200) When used with Diesel Engine Pump Units includes: A built-in GSM modem, Weather-Proof Enclosure, 2-Pin Temperature Probe, Temperature Interface Unit (TIU), Hi/Lo Pressure Switchgauge, Pulsation Damper, No-Flow Switch and Fuel Solenoid Valve. JDSM (EPJDSM00202) When used with Tractor PTO Pump Units includes: All as described above but supplied without the weather-proof enclosure. JDSM (EPJDSM00201) Box only, upgrade from existing JSM unit JDSM box only (pictured top right) supplied as upgrade to replace an existing JSM monitoring unit on PTO pump.

Automatic Priming and Engine Starting/Stopping
with Shut-Down Notification by SMS Text Message

Automatically primes and starts your diesel engine pump unit from your mobile phone, an SMS text message can be requested to confirm by return.

Reports operational status, on request, by SMS text message (stopped/starting/running)

Sends SMS text message on shut-down reporting unit identification and time/date message was sent

Requires a suitable GSM SIM card (Not supplied)

For fully specification see JDSM Autostart EPJDSM00300

For more information & prices please < Contact Us >