Irrigation Equipment, Mixrite Dosing Pumps

Javelin Irrigation Systems Limited
The Pump House
Belvoir Way
Fairfield Industrial Estate
Louth, Lincolnshire, LN11 0YA

Tel: +44 (0)1507 607175
Fax: +44 (0)1507 607521
Email: mail@javelinirrigation.co.uk

HOME

PRODUCTS

PROFILE

SPECIALS

NEWS

CONTACT

"MixRite" Dosing Pumps

Proportioning Water Pump

The MixRite range of Water Powered Self Priming Dosing Pumps is designed for the accurate injection of a wide variety of liquid additives into water and other liquids used in both agriculture and industry.

Applications

Fertilisers
Vitamins
Fertigation
Disinfectants

Medicines
Water Treatment
Supplementation
Detergents & Soaps

MixRite Advantages and Specifications

Easily installed into water-line
Easy to set up, operate and maintain
No electricity required - operated solely by water pressure
Automatic self-priming
Unaffected by variations in flow or pressure
Works with minimal pressure loss and accuracy
External adjustment - no contact between you and the chemical solution
Strong plastic construction with high chemical resistance
High resistance to U.V. radiation
Environmentally friendly - reduces the risk of pollution through over concentration of fertilisers
Reduces additive wastage - apply exactly the right dose, when and where it is needed.
Maximum suction lift is 10 feet
Operating Temperature: +4ºC to +40ºC

Air Release Valve system
Allows trapped air to escape. This air release is accompanied by a slight loss of water

Manual On/Off System
On - Turn the MixRite unit On and allow free flow of water through the unit with the liquid added.
Off - Turn the MixRite unit Off and allow free flow of water only through the unit.

By-Pass system
Pumped additive flows through by-pass pipe connected to the water line without passing through the water engine.

2502

TF5

TF10

TF25

Model	Adjustable Dosage %	Flow Rate		Pressure		Standard Specifications	Inlet x Outlet	Part No.
Model	Adjustable Dosage %	Litre/Hour	Gals/Hour	Bar	PSI	Standard Specifications	Inlet x Outlet	Part No.
2502	0.2-2	20-2500	4.3-550	0.2-6	2.9-85	Air Release	¾"M	TEF02502
2504	0.4-4	20-2500	4.3-550	0.2-6	2.9-85	Air Release	¾"M	TEF02504
2510	3-10	50-2500	11-550	0.2-6	7-85	Air Release	¾"M	TEF02510
2512	0.2-2	50-2500	11-550	0.4-6	5.8-85	By-Pass with Air Release	¾"M	TEF02512
12502	0.2-2	20-2500	4.3-550	0.2-6	2.9-8	On/Off	¾"M	TEF12502
12504	0.4-4	20-2500	4.3-550	0.2-6	2.9-85	On/Off	¾"M	TEF12504
TF5-001*	0.1-1	200-5000	48-1320	1-8	14.7-120	Air Release	1"M	TEF05001
TF5-002*	0.2-2	200-5000	48-1320	1-8	14.7-120	Air Release	1"M	TEF05002
TF5-005*	0.5-5	200-5000	48-1320	1-8	14.7-120	Air Release	1"M	TEF05005
TF10-002**	0.2-2.5	500-10000	110-2200	1-8	14.7-120	Air Release	1½"M	TEF10002
TF10-005**	1-5	500-10000	110-2200	1-8	14.7-120	Air Release	1½"M	TEF10005
TF25-002**	0.2-2.5	2000-25000	440-5500	1-8	14.7-120	Air Release	63mm PE	TEF25002
TF25-005**	1-5	2000-25000	440-5500	1-8	14.7-120	Air Release	63mm PE	TEF25005
* TF5 has an integral anti-siphon valve. * TF5 can also be supplied with the manual on/off system if required - price for this is available on request. ** TF25 Unit comes complete with steel stand. A stand for the TF10 can be supplied on request at extra cost.