| Tank Construction
|
- Corrugated, galvanised curved steel
panels with punched bolt holes
- 12mm (½") PVC capping to cover
the top edge of the tank
- 25mm (1") PVC capping to trap
the overlap of the liner on to the 12mm capping
- Straining wire and strainer to
secure liner
- M10 x 20mm plated bolts, nuts and
washers
- Holding down brackets and fixing
bolts to secure the tank to the base
- Free drilled a panel to accept your
chosen size of tank outlet
|
| Tank Base Requirements |
The tank should be erected on a smooth
level concrete base (type C35 300 kg/m³), not less than 10cm
(4") in thickness and 61cm (24") greater in diameter than that
of the tank. |
| Tank Covers |
| Galvanised Steel
|
Manufactured using
galvanised steel sheets, this steel sectional roof complete with
an access hatch and ball valve cover offers a secure safe solution
as well as being aesthetically pleasing. The galvanised
steel cover is designed and manufactured to comply with BS5950,
BS5502 and CP.3 chapter 5 regarding wind and snow loadings. |
 |
Anti-Algae
|
Manufactured using a
200 gm/m² woven polypropylene supplied with securing straps and a
centre pole where necessary. The Anti-Algae cover gives
excellent UV protection preventing algae growth, protection from
wind borne debris and allows rainwater to permeate through. Please note that this cover is not designed to withstand high
winds or snow and should be removed when these conditions are
forecast. |
PVC Roof
|
A heavy duty tailored reinforced PVC supplied with
eyelets, polypropylene guy ropes to secure it to the tank and a
support structure appropriate to the height of the tank. The
PVC cover is a cost effective cover which prevents the growth of
algae. |
Floating Cover
|
Woven Polypropylene -
tailored cover supplied with integral PVC pipe to aid
buoyancy. This type of cover is suitable for sizes up to
24.69m (81')
so presents an option for preventing algae growth on very large
tanks. |
Floating Cover
|
PVC - manufactured
from inflated PVC this cover offers a cost effective solution to
the problem of algae growth. |
| Tank
Liners |
Butyl Rubber
|
Butyl rubber liners
have excellent flexibility, low temperature characteristics and UV
stability. Ideal
for all irrigation water applications as well as reverse osmosis
water and some grey water applications.
A drinking water quality (WRc)
approved butyl rubber is available - designated the 'DWQ' liner.
|
PVC
|
Manufactured in 0.75mm
thickness, the PVC liner is fish and plant compatible and is
recommended where a high dosage of chlorine exists. Not
suitable for drinking water but ideal for irrigation water. |
GreenSeal
|
This new range of
liners looks identical to Butyl but surprisingly it Costs Less, has
Superior Physical Properties and can be used on a 4-ring high tank
in 0.75mm thickness. Benefits against Butyl are higher UV
stability, superior strength and greater tolerance to extreme
weather conditions. |
Coloured
Steel Tank Kits (Green)
We are now able to offer tanks in coated steel with a textured
finish. The thick Armacor
coating compliments the already durable galvanised steel with an
even better than normal corrosion resistance, making it ideal for
areas of high humidity and salt spray.
In addition Armacor has
excellent scratch, abrasion and UV resistance and will prolong the
normal life of a corrugated steel tank. The
standard colour is green (BS12B27), so now steel tanks will
blend into the surrounding countryside. |
Tank
Enclosures
Steel Enclosure for securely enclosing all inlet pipework
which can then be insulated. Stop cock can also be
located at the base of enclosure. The enclosure is
located on the side of the tank. |
|
|
| Polyethylene
Tanks |
Blow
Moulded Tanks
- Rotationally moulded
polyethylene tanks for above and below ground storage
- BBA Approved
- Range of shapes and
sizes
- No assembly required
- 10 year guarantee
|
|
| Sizes |
- 1250 litre
capacity 'Slimline'
- 2600 litre
capacity (with Full Access Hatch)
- 3635 litre
capacity (with Full Access Hatch)
- 5455 litre
capacity (with Full Access Hatch)
- 7270 litre
capacity (with Full Access Hatch)
|
|
|
| Accessories
& Optional Extras |
 |
| Steel Outlets in
various sizes are available and
PVC tank Outlets, Tank Strainers, Brass Gate Valves,
Protective Fleece for liners are also available |
|
