| * |
The meter can be mounted horizontally
or vertically |
|
| * |
Easy to install, the size of the meter
and the direction of flow are shown on the meter body |
| *
|
The meters are manufactured in UNI G25
cast iron with integral flanges, drilled and machined to UNI PN10/16 |
| * |
Both external and internal surfaces
are protected with a durable epoxy coating |
| * |
The new measuring system allows a free
flow of water through the meter |
*
|
The dry dial is operated by a small
turbine embedded in the body of the meter and can be rotated to
facilitate ease of reading from any angle. |
| * |
The dial is protected by a metal
cover which can be secured with a padlock if required. |
| * |
Suitable for cold water up to 50°C |
*
|
The meter mechanism is manufactured so
that a reed contact switch may be connected at a later date, at an
additional cost. |
| *
|
It is possible to connect the meters
for use in water distribution delivery groups - please ask for details |
